Publications → Control of pneumatic servo systems
-
Šitum, Ž., Pavković, D., Novaković, B., "Servo Pneumatic Position Control Using Fuzzy PID Gain Scheduling", ASME Journal of Dynamic System Measurement and Control, Vol. 126, No. 2, June 2004, pp. 376-387.
-
Ž. Šitum, J. Petrić, M. Crneković, "Control of Pneumatically Actuated Inverted Wedge", 7th International Research/ Expert Conference, TMT'03, Lloret de Mar, Barcelona, Spain, September, 2003.
-
Ž. Šitum, J. Petrić, M. Crneković, "Sliding Mode Control Applied to Pneumatic Servo Drive", Proceedings of 11th Mediterranean Conference on Control & Automation (MED'03) , June, Rhodes, Greece, 2003.
-
Šitum, Ž., Novaković, B., "Fuzzy Control Application in Pneumatically Actuated Drives", 1st International Conference on Advanced Technologies for Developing Countries, ATDC'02, Slav. Brod, 2002.
-
Šitum, Ž., Crneković M., "Control of a Pneumatic Actuator Using Proportional Pressure Regulators", 8th International Scientific Conference on Production Engineering CIM 2002, Brijuni, 2002.
-
Ž. Šitum, "Pneumatic Servo systems Control using Fuzzy Logic Controller", Ph. D. Thesis, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Croatia, 2001.
-
Ž. Šitum, J. Petrić, "Modeling and Control of Servopneumatic Drive", Strojarstvo, Vol. 43, No. 1-3, pp. 29-39, 2001.
-
Ž. Šitum, B. Novaković, J. Petrić, "Identification and Control of Pneumatic Servodrives", Proceedings of the 9th Mediterranean Conference on Control and Automation, June 27-29, Dubrovnik, 2001
-
Ž. Šitum, B. Novaković, J. Petrić, "Pneumatic Servodrives Control Using On/off Solenoid Valves", Proceedings of the 7th International Scientific Conference on Production Engineering CIM 2001, Lumbarda, Korčula, pp. II 070-080, 2001.
-
J. Petrić, Ž. Šitum, "Application of Pneumatic Servodrives in Positioning", Proceedings of the 6th International Scientific Conference on Production Engineering CIM 2000, Lumbarda, Korčula, pp.II 025-032, 2000.
-
Ž. Šitum,J. Petrić, "Control of Servopneumatic Positioning Drives", Proceedings of the 10th International DAAAM Symposium, Vienna, pp. 501-502, 1999.
|